Reduced macular thickness and vascular density in abnormal glucose metabolism patients: A meta-analysis of optical coherence tomography (OCT) and OCT angiography studies.

BACKGROUND: Alterations in macular thickness and vascular density before clinically visible diabetic retinopathy (DR) remain inconclusive. This study aimed to determine whether retinal manifestations in abnormal glucose metabolism (AGM) patients differ from those in the healthy individuals. METHODS: The Preferred Reporting Items for Systematic Reviews and Meta-Analyses 2020 Statement was followed as our guideline for this meta-analysis. PubMed, Embase, and Web of Science were searched between 2000 and 2021. The eligibility criteria were AGM patients without DR. Primary and secondary outcomes measured by optical coherence tomography (OCT) and OCT angiography (OCTA) were analyzed and expressed as standardized mean differences (SMDs) with 95% confidence intervals (CIs). A random-effects model was used in the data synthesis. The meta-analysis was conducted using Stata (version 13.1). RESULTS: A total of 86 observational studies involving 13,773 participants and 15,416 eyes were included. OCT revealed that compared to healthy controls, the total macular thickness of AGM patients was thinner, including the thickness of fovea (-0.24, 95% CI [-0.39, -0.08]; P = 0.002, I2 = 87.7%), all regions of parafovea (-0.32, 95% CI [-0.54, -0.11]; P = 0.003; I2 = 71.7%) and the four quadrants of perifovea; the thickness of peripapillary retinal nerve fiber layer (pRNFL), macular retinal nerve fiber layer (mRNFL), and ganglion cell layer (GCL) also decreased. OCTA indicated that the superficial and deep vascular density decreased, the foveal avascular zone (FAZ) area enlarged, and the acircularity index (AI) reduced in AGM individuals. CONCLUSIONS: Retinal thinning and microvascular lesions have occurred before the advent of clinically detectable DR; OCT and OCTA may have the potential to detect these preclinical changes. REGISTRATION: PROSPERO; http://www.crd.york.ac.uk/prospero/; No. CRD42021269885.

Control of Kinetic Pathways toward Supramolecular Chiral Polymorphs for Tunable Circularly Polarized Luminescence.

An amphiphilic aza-BODIPY dye (S)-1 bearing two chiral hydrophilic side chains with S-stereogenic centers was synthesized. This dye exhibited kinetic-controlled self-assembly pathways and supramolecular chiral polymorphism properties in MeOH/H2O (9/1, v/v) mixed solvent. The (S)-1 monomers first aggregated into a kinetic controlled, off-pathway species Agg. A, which was spontaneously transformed into an on-pathway metastable aggregate (Agg. B) and subsequently into the thermodynamic Agg. C. The three aggregate polymorphs of dye (S)-1 displayed distinct optical properties and nanomorphologies. In particular, chiral J-aggregation characteristics were observed for both Agg. B and Agg. C, such as Davydov-split absorption bands (Agg. B), extremely sharp and intense J-band with large bathochromic shift (Agg. C), non-diminished fluorescence upon aggregation, as well as strong bisignated Cotton effects. Moreover, the AFM and TEM studies revealed that Agg. A had the morphology of nanoparticle while fibril or rod-like helical nanostructures with left-handedness were observed respectively for Agg. B and Agg. C. By controlling the kinetic transformation process from Agg. B to Agg. C, thin films consisting of Agg. B and Agg. C with different ratios were prepared, which displayed tunable CPL with emission maxima at 788 - 805 nm and g-factors between -4.2 × 10-2 and -5.1 × 10-2.

Phosphorus-rich CoP4@N-C nanoarrays for efficient nitrate-to-ammonia electroreduction.

The electrochemical nitrate reduction reaction (NO3-RR) is a novel green method for ammonia synthesis. However, the lack of sufficient catalysts has hindered the development of the NO3-RR. This research develops a transformation of porous CoP@N-C/CC into porous phosphorus-rich CoP4@N-C/CC through high-temperature calcination. Due to its unique phosphating-rich structure, CoP4@N-C/CC exhibits an excellent Faraday efficiency (FE: 92.3%) and NH3 yield (610.2 µmol h-1 cm-2). Such a catalyst with more P-P bonds can provide more active sites, effectively enhancing the adsorption and reaction processes of reactant molecules. In addition, the catalyst has good durability and catalytic stability, which provides a possibility for the future application of electrocatalytic ammonia production.

Chaperones Hsc70 and Hsp70 play distinct roles in the replication of bocaparvovirus minute virus of canines.

Minute virus of canines (MVC) belongs to the genus Bocaparvovirus (formerly Bocavirus) within the Parvoviridae family and causes serious respiratory and gastrointestinal symptoms in neonatal canines worldwide. A productive viral infection relies on the successful recruitment of host factors for various stages of the viral life cycle. However, little is known about the MVC-host cell interactions. In this study, we identified that two cellular proteins (Hsc70 and Hsp70) interacted with NS1 and VP2 proteins of MVC, and both two domains of Hsc70/Hsp70 were mediated for their interactions. Functional studies revealed that Hsp70 was induced by MVC infection, knockdown of Hsc70 considerably suppressed MVC replication, whereas the replication was dramatically promoted by Hsp70 knockdown. It is interesting that low amounts of overexpressed Hsp70 enhanced viral protein expression and virus production, but high amounts of Hsp70 overexpression weakened them. Upon Hsp70 overexpressing, we observed that the ubiquitination of viral proteins changed with Hsp70 overexpression, and proteasome inhibitor (MG132) restored an accumulation of viral proteins. In addition, we verified that Hsp70 family inhibitors remarkably decreased MVC replication. Overall, we identified Hsc70 and Hsp70 as interactors of MVC NS1 and VP2 proteins and were involved in MVC replication, which may provide novel targets for anti-MVC approach.

Strong aggregation-induced electrochemiluminescence of pyrene-coordination metal-organic frameworks coupled with zero-valent iron as novel accelerator for ultrasensitive immunoassay.

Polycyclic aromatic hydrocarbons (PAHs) are excellent alternative luminophores for electrochemiluminescence (ECL) immunoassays. However, they are inevitably limited by the aggregation-caused quenching effect. In this study, aimed at eliminating the aggregation quenching of PAHs, luminescent metal-organic frameworks (MOFs) with 1,3,6,8-tetra(4-carboxybenzene)pyrene (H4TBAPy) as the ligand were exploited as a novel nano-emitter for the construction of ECL immunoassays. The luminophore exhibits efficient aggregation-induced emission enhancement, good acid-base resistance property and unusual ECL reactivity. In addition, the simultaneous use of potassium persulfate and hydrogen peroxide as dual co-reactants resulted in a synergistic enhancement of the cathodic ECL efficiency. The use of magnetic iron-nickel alloys as the multifunctional sensing platform can further enhance the ECL activity, and its enriched zero-valent iron as a co-reactant accelerator effectively drives ECL analytical performance. Profiting from the excellent characteristics, signal-on ECL immunoassays have been constructed. With carcinoembryonic antigen as the model analysis target, a detection limit of 0.63 pg/mL was obtained within the linear range of 1 pg/mL to 50 ng/mL, accompanied by excellent analytical performance. This report opens a new window for the rational design of efficient ECL illuminators, and the proposed ECL immunoassays may find promising applications in the detection of disease markers.

Controlled-Release Electrochemiluminescence Biosensor with Strong Self-On Effect by a Multiple Signal Amplification Strategy for Trace Detection of Prostate-Specific Antigen.

The enhancement of sensitivity in biological analysis detection can reduce the probability of false positives of the biosensor. In this work, a novel self-on controlled-release electrochemiluminescence (CRE) biosensor was designed by multiple signal amplification and framework-enhanced stability strategies. As a result, the changes of the ECL signal were enhanced before and after the controlled-release process, achieving sensitive detection of prostate-specific antigen (PSA). Specifically, for one thing, Fe3O4@CeO2-NH2 with two paths for enhancing the generation of coreactant radicals was used as the coreaction accelerator to boost ECL performance. For another, due to the framework stability, zeolitic imidazolate framework-8-NH2 (ZIF-8-NH2) was combined with luminol to make the ECL signal more stable. Based on these strategies, the constructed CRE biosensor showed a strong self-on effect in the presence of PSA and high sensitivity in a series of tests. The detection range and limit of detection (LOD) were 5 fg/mL to 10 ng/mL and 2.8 fg/mL (S/N = 3), respectively, providing a feasible approach for clinical detection of PSA.

A Mettl16/m6A/mybl2b/Igf2bp1 axis ensures cell cycle progression of embryonic hematopoietic stem and progenitor cells.

Prenatal lethality associated with mouse knockout of Mettl16, a recently identified RNA N6-methyladenosine (m6A) methyltransferase, has hampered characterization of the essential role of METTL16-mediated RNA m6A modification in early embryonic development. Here, using cross-species single-cell RNA sequencing analysis, we found that during early embryonic development, METTL16 is more highly expressed in vertebrate hematopoietic stem and progenitor cells (HSPCs) than other methyltransferases. In Mettl16-deficient zebrafish, proliferation capacity of embryonic HSPCs is compromised due to G1/S cell cycle arrest, an effect whose rescue requires Mettl16 with intact methyltransferase activity. We further identify the cell-cycle transcription factor mybl2b as a directly regulated by Mettl16-mediated m6A modification. Mettl16 deficiency resulted in the destabilization of mybl2b mRNA, likely due to lost binding by the m6A reader Igf2bp1 in vivo. Moreover, we found that the METTL16-m6A-MYBL2-IGF2BP1 axis controlling G1/S progression is conserved in humans. Collectively, our findings elucidate the critical function of METTL16-mediated m6A modification in HSPC cell cycle progression during early embryonic development.

Differentiated impacts of short-term exposure to fine particulate constituents on infectious diseases in 507 cities of Chinese children and adolescents: A nationwide time-stratified case-crossover study from 2008 to 2021.

This study assesses the association of short-term exposure to PM2.5 (particles ≤2.5 µm) on infectious diseases among Chinese children and adolescents. Analyzing data from 507 cities (2008-2021) on 42 diseases, it focuses on PM2.5 components (black carbon (BC), ammonium (NH4+), inorganic nitrate (NO3-), organic matter (OM), and sulfate (SO42-)). PM2.5 constituents significantly associated with incidence. Sulfate showed the most substantial effect, increasing all-cause infectious disease risk by 2.72 % per interquartile range (IQR) increase. It was followed by BC (2.04 % increase), OM (1.70 %), NO3- (1.67 %), and NH4+ (0.79 %). Specifically, sulfate and BC had pronounced impacts on respiratory diseases, with sulfate linked to a 10.73 % increase in seasonal influenza risk and NO3- to a 16.39 % rise in tuberculosis. Exposure to PM2.5 also marginally increased risks for gastrointestinal, enterovirus, and vectorborne diseases like dengue (7.46 % increase with SO42-). Sexually transmitted and bloodborne diseases saw an approximate 6.26 % increase in incidence, with specific constituents linked to diseases like hepatitis C and syphilis. The study concludes that managing PM2.5 levels could substantially reduce infectious disease incidence, particularly in China's middle-northern regions. It highlights the necessity of stringent air quality standards and targeted disease prevention, aligning PM2.5 management with international guidelines for public health protection.

Interfacial charge transfer in sheet Ni2P-FePx heterojunction to promote the study of electrocatalytic oxygen evolution.

The substantial expense associated with catalysts significantly hampers the progress of electrolytic water-based hydrogen production technology. There is an urgent need to find non-precious metal catalysts that are both cost-effective and highly efficient. Here, the porous Ni2P-FePx nanomaterials were successfully prepared by hydrothermal method, nickel foam as the base, iron nitrate solution as the caustic agent and iron source, and finally phosphating at low temperature. The obtained porous Ni2P-FePx nanosheets showed excellent catalytic activity under alkaline PH = 14, and an overpotential of merely 241 mV was required to achieve a current density of 50 mA cm-2. The morphology of the nanosheet can still be flawlessly presented on the screen after 50 h of working at high current density.

Self-Assembly-Induced Enhancement of Cathodic Electrochemiluminescence of Copper Nanoclusters for a Split-Type Matrix Metalloproteinase 14 Sensing Platform.

The unique optoelectronic and tunable luminescent characteristics of copper nanoclusters (Cu NCs) make them extremely promising as luminophores. However, the limited luminescence intensity and stability of Cu NCs have restricted their application in the field of electrochemiluminescence (ECL). Herein, a self-assembly-induced enhancement strategy was successfully employed to enhance the cathodic ECL performance of flexible ligand-stabilized Cu NCs. Specifically, Cu NCs form ordered sheetlike structures through intermolecular force. The restriction of ligand torsion in this self-assembled structure leads to a significant improvement in the ECL properties of the Cu NCs. Experimental results demonstrate that the assembled nanoscale Cu NC sheets exhibit an approximately three-fold increase in cathodic ECL emission compared to the dispersed state of Cu NCs. Furthermore, assembled nanoscale Cu NCs sheets were utilized as signal probes in conjunction with a specific short peptide derived from the catalytic structural domain of matrix metalloproteinase 14 (MMP 14) as the identification probe, thereby establishing a split-type ECL sensing platform for the quantification of NMP 14. The investigation has revealed the exceptional performance of assembled nanoscale Cu NCs sheets in ECL analysis, thus positioning them as novel and promising signal probes with significant potential in the field of sensing.

Long-term variations of urban-Rural disparities in infectious disease burden of over 8.44 million children, adolescents, and youth in China from 2013 to 2021: An observational study.

BACKGROUND: An accelerated epidemiological transition, spurred by economic development and urbanization, has led to a rapid transformation of the disease spectrum. However, this transition has resulted in a divergent change in the burden of infectious diseases between urban and rural areas. The objective of our study was to evaluate the long-term urban-rural disparities in infectious diseases among children, adolescents, and youths in China, while also examining the specific diseases driving these disparities. METHODS AND FINDINGS: This observational study examined data on 43 notifiable infectious diseases from 8,442,956 cases from individuals aged 4 to 24 years, with 4,487,043 cases in urban areas and 3,955,913 in rural areas. The data from 2013 to 2021 were obtained from China's Notifiable Infectious Disease Surveillance System. The 43 infectious diseases were categorized into 7 categories: vaccine-preventable, bacterial, gastrointestinal and enterovirus, sexually transmitted and bloodborne, vectorborne, zoonotic, and quarantinable diseases. The calculation of infectious disease incidence was stratified by urban and rural areas. We used the index of incidence rate ratio (IRR), calculated by dividing the urban incidence rate by the rural incidence rate for each disease category, to assess the urban-rural disparity. During the nine-year study period, most notifiable infectious diseases in both urban and rural areas exhibited either a decreased or stable pattern. However, a significant and progressively widening urban-rural disparity in notifiable infectious diseases was observed. Children, adolescents, and youths in urban areas experienced a higher average yearly incidence compared to their rural counterparts, with rates of 439 per 100,000 compared to 211 per 100,000, respectively (IRR: 2.078, 95% CI [2.075, 2.081]; p < 0.001). From 2013 to 2021, this disparity was primarily driven by higher incidences of pertussis (IRR: 1.782, 95% CI [1.705, 1.862]; p < 0.001) and seasonal influenza (IRR: 3.213, 95% CI [3.205, 3.220]; p < 0.001) among vaccine-preventable diseases, tuberculosis (IRR: 1.011, 95% CI [1.006, 1.015]; p < 0.001), and scarlet fever (IRR: 2.942, 95% CI [2.918, 2.966]; p < 0.001) among bacterial diseases, infectious diarrhea (IRR: 1.932, 95% CI [1.924, 1.939]; p < 0.001), and hand, foot, and mouth disease (IRR: 2.501, 95% CI [2.491, 2.510]; p < 0.001) among gastrointestinal and enterovirus diseases, dengue (IRR: 11.952, 95% CI [11.313, 12.628]; p < 0.001) among vectorborne diseases, and 4 sexually transmitted and bloodborne diseases (syphilis: IRR 1.743, 95% CI [1.731, 1.755], p < 0.001; gonorrhea: IRR 2.658, 95% CI [2.635, 2.682], p < 0.001; HIV/AIDS: IRR 2.269, 95% CI [2.239, 2.299], p < 0.001; hepatitis C: IRR 1.540, 95% CI [1.506, 1.575], p < 0.001), but was partially offset by lower incidences of most zoonotic and quarantinable diseases in urban areas (for example, brucellosis among zoonotic: IRR 0.516, 95% CI [0.498, 0.534], p < 0.001; hemorrhagic fever among quarantinable: IRR 0.930, 95% CI [0.881, 0.981], p = 0.008). Additionally, the overall urban-rural disparity was particularly pronounced in the middle (IRR: 1.704, 95% CI [1.699, 1.708]; p < 0.001) and northeastern regions (IRR: 1.713, 95% CI [1.700, 1.726]; p < 0.001) of China. A primary limitation of our study is that the incidence was calculated based on annual average population data without accounting for population mobility. CONCLUSIONS: A significant urban-rural disparity in notifiable infectious diseases among children, adolescents, and youths was evident from our study. The burden in urban areas exceeded that in rural areas by more than 2-fold, and this gap appears to be widening, particularly influenced by tuberculosis, scarlet fever, infectious diarrhea, and typhus. These findings underscore the urgent need for interventions to mitigate infectious diseases and address the growing urban-rural disparity.

Electrospun nanofibrous mats loaded with gemcitabine and cisplatin suppress bladder tumor growth by improving the tumor immune microenvironment.

The perplexing issues related to positive surgical margins and the considerable negative consequences associated with systemic chemotherapy have posed ongoing challenges for clinicians, especially when it comes to addressing bladder cancer treatment. The current investigation describes the production of nanocomposites loaded with gemcitabine (GEM) and cisplatin (CDDP) through the utilization of electrospinning technology. In vitro and in vivo studies have provided evidence of the strong effectiveness in suppressing tumor advancement while simultaneously reducing the accumulation of chemotherapy drugs within liver and kidney tissues. Mechanically, the GEM and CDDP-loaded electrospun nanocomposites could effectively eliminate myeloid-derived suppressor cells (MDSCs) in tumor tissues, and recruit CD8+ T cells and NKp46+ NK cells to kill tumor cells, which can also effectively inhibit tumor microvascular formation. Our investigation into the impact of localized administration of chemotherapy through GEM and CDDP-loaded electrospun nanocomposites on the tumor microenvironment will offer novel insights for tackling tumors.

A Co-Reactive Immunosensor Based on Ti3C2Tx MXene@TiO2-MoS2 Hybrids Promoting luminol@Au@Ni-Co NCs Electrochemiluminescence for CYFRA 21-1 Detection.

The construction of assays is capable of accurately detecting cytokeratin-19 (CYFRA 21-1), which is critical for the rapid diagnosis of nonsmall cell lung cancer. In this work, a novel electrochemiluminescence (ECL) immunosensor based on the co-reaction promotion of luminol@Au@Ni-Co nanocages (NCs) as ECL probe by Ti3C2Tx MXene@TiO2-MoS2 hybrids as co-reaction accelerator was proposed to detect CYFRA 21-1. Ni-Co NCs, as a derivative of Prussian blue analogs, can be loaded with large quantities of Au NPs, luminol, and CYFRA 21-1 secondary antibodies due to their high specific surface area. To further improve the sensitivity of the developed ECL immunosensor, Ti3C2Tx MXene@TiO2-MoS2 hybrids were prepared by in situ growth of TiO2 nanosheets on highly conductive Ti3C2Tx MXene, and MoS2 was homogeneously grown on Ti3C2Tx MXene@TiO2 surfaces by the hydrothermal method. Ti3C2Tx MXene@TiO2-MoS2 hybrids possess excellent catalytic performance on the electro-redox of H2O2 generating more O2·- and obtaining optimal ECL intensity of the luminol/H2O2 system. Under the appropriate experimental conditions, the quantitative detection range of CYFRA 21-1 was from 0.1 pg mL-1 to 100 ng mL-1, and the limit of detection (LOD) was 0.046 pg mL-1. The present sensor has a lower LOD with a wider linear range, which provides a new analytical assay for the early diagnosis of small-cell-type lung cancer labels.

The marine-derived compound TAG alleviates Parkinson's disease by restoring RUBCN-mediated lipid metabolism homeostasis.

Parkinson's disease (PD) is the second most common neurodegenerative disease, and its prevalence is increasing. Currently, no effective therapies for PD exist. Marine-derived natural compounds are considered important resources for the discovery of new drugs due to their distinctive structures and diverse activities. In this study, tetrahydroauroglaucin (TAG), a polyketide isolated from a marine sponge, was found to have notable neuroprotective effects on MPTP/MPP+-induced neurotoxicity. RNA sequencing analysis and metabolomics revealed that TAG significantly improved lipid metabolism disorder in PD models. Further investigation indicated that TAG markedly decreased the accumulation of lipid droplets (LDs), downregulated the expression of RUBCN, and promoted autophagic flux. Moreover, conditional knockdown of Rubcn notably attenuated PD-like symptoms and the accumulation of LDs, accompanied by blockade of the neuroprotective effect of TAG. Collectively, our results first indicated that TAG, a promising PD therapeutic candidate, could suppress the accumulation of LDs through the RUBCN-autophagy pathway, which highlighted a novel and effective strategy for PD treatment.

Development of reusable electrochemiluminescence sensing microchip for detection of vomitoxin.

In this work, a reusable DNA sensing microchip was developed for detection of vomitoxin (deoxynivalenol, DON) in sorghum using Cd-based core-shell CdSe@CdS quantum dots (QDs) as promising electrochemiluminescence (ECL) emitter. The size-adjustable aqueous phase CdSe@CdS QDs were prepared through homogeneous method, exhibiting strong cathodic ECL emission with a central wavelength of 520 nm in S2O82- coreactant. And gold nanoparticles-modified iron cobalt cyanide hydrate (Fe-Co-Au) was introduced as an accelerator to amplify the ECL signal. ECL signal was quenched after the formation of a double-stranded (dsDNA) S1-S2 by generating an electron transfer system between the emitter and ferrocene (Fc), which are modified on the aptamer (ssDNA S1) and its complement sequence (ssDNA S2), respectively. When the target DON is presence, the aptamer ssDNA S1 will bind to the DON and trigger the unbinding of double strands DNA and the release of the ssDNA S2, thus the signal can be generated. This approach offers a feasible method for the detection of DON within the range of 1 ng/mL to 200 ng/mL.

Confinement-enhanced electrochemiluminescence by Ru(dcbpy)32+-functionalized γ-CD-MOF@COF-LZU1 porous hybrid material as micro-reactor for CYFRA 21-1 detection.

The improvement of electrochemiluminescence (ECL) performance relies on the electron transfer efficiency between luminophore and coreactant. An ultrasensitive ECL micro-reactor with confinement-enhanced performance was prepared by using the covalent organic framework-LZU1-functionalized metal-organic framework (MOF@COF-LZU1) as a platform to assemble enormous N,N-dibutyl-2-hydroxyethylamine (DBAE) and tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) [Ru(dcbpy)32+] into its pore channels. Compared to individual substances of γ-CD-MOF and COF-LZU1, the synergistic effects can conduce to the enhancement of the intensity, durability and sensitivity of the micro-reactor. Besides, COF-LZU1 can provide a mild environment to accommodate a certain amount of DBAE by concentrating them from the aqueous solution into its hydrophobic cavities and boost the oxidation efficiency of DBAE to generate more DBAE●+ and profited the survival of DBAE●, leading to an improved reaction efficiency with the Ru(dcbpy)32+ intermediate. Thanks to the confinement-enhanced strategy, engineered as high-functioning luminescent materials, Ru@γ-CD-MOF@COF-LZU1 micro-reactors decorated with Au NPs can facilitate electron transfer and capture primary antibodies (Ab1). Moreover, Au-Pd-Pt noble metal aerogels (NMAs) functionalized MoS2 NFs (Au-Pd-Pt NMAs@MoS2 NFs) were chosen as base material due to its large specific surface areas, high porosity, and excellent electrical conductivity. Based on above merits, the sensor demonstrated a sensitive response to CYFRA 21-1 detection in a linear concentration gradient from 10 fg/mL to 50 ng/mL with a detection limit of 0.0055 pg/mL (S/N = 3). The COF-LZU1 decorated ECL micro-reactors were constructed based on the signal amplification strategies to realize accurate CYFRA 21-1 detection.

A portable fluorescence detection device based on a smartphone employing carbon nanodots for Mn2+ sensing.

The measurement of fluorescence emission for quantitative analysis is typically based on a traditional spectrofluorometer, which limits an onsite detection approach. Thus, an alternative device should be developed for fulfilling this analysis outside of the laboratory. Therefore, a low-cost, portable, and low-energy consumption fluorescence reader-based smartphone device was developed. An ultraviolet light-emitting diodes (UV-LED) was used to construct the fluorescence device-based smartphone as a low-power excitation light source. The smartphone camera was used as a detector for detecting photons from the fluorescence emission process of the fluorescence probe and was connected to a digital image platform. Transparent acrylic with orange and yellow colors was employed as a filter for reducing the interference from light source intensity. The obtained digital image was converted to red, green and blue (RGB) intensity using a custom-designed smartphone application. N,S-doped carbon nanodots (N,S-CDs) were demonstrated to be a good fluorescence indicator for determining trace quantities of Mn2+ in cosmetics. The approach exhibited high selectivity and sensitivity, detecting and quantifying analytes at 1-5 µM concentrations. Furthermore, the method's detection limit of 0.5 µM reflects its capacity to detect trace amounts of a target analyte. Mn2+ in cosmetic products was successfully analyzed using this device with high accuracy comparable with the results from inductively coupled plasma-optical emission spectroscopy (ICP-OES).

Ultrasensitive Electrochemiluminescence Biosensor Based on Efficient Signal Amplification of Copper Nanoclusters Induced by CaMnO3 for CD44 Trace Detection.

Metal nanoclusters (Me NCs) have become a research hotspot in the field of electrochemiluminescence (ECL) sensing analysis. This is primarily attributed to their excellent luminescent properties and biocompatibility along with their easy synthesis and labeling characteristics. At present, the application of Me NCs in ECL mainly focuses on precious metals, whose high cost, to some extent, limits their widespread application. In this work, Cu NCs with cathode ECL emissions in persulfate (S2O82-) were prepared as signal probes using glutathione as ligands, which exhibited stable luminescence signals and high ECL efficiency. At the same time, CaMnO3 was introduced as a co-reaction promoter to increase the ECL responses of Cu NCs, thereby further expanding their application potential in biochemical analysis. Specifically, the reversible conversion of Mn3+/Mn4+ greatly promoted the generation of sulfate radicals (SO4•-), providing a guarantee for improving the luminescence signals of Cu NCs. Furthermore, a short peptide (NARKFYKGC) was introduced to enable the fixation of antibodies to specific targets, preventing the occupancy of antigen-binding sites (Fab fragments). Therefore, the sensitivity of the biosensor could be significantly enhanced by releasing additional Fab fragments. Considering the approaches discussed above, the constructed biosensor could achieve sensitive detection of CD44 over a broad range (10 fg/mL-100 ng/mL), with an ultralow detection limit of 3.55 fg/mL (S/N = 3), which had valuable implications for the application of nonprecious Me NCs in biosensing analysis.

Sulfur defect-engineered Bi2S3-x/In2S3-y mediated signal enhancement of photoelectrochemical sensor for lead ions detection.

Lead ions (Pb2+) are heavy metal ions that are harmful to living organisms and ecosystems. It is important to realize sensitive detection of Pb2+ in the environment. In this study, a signal enhancement photoelectrochemical (PEC) sensor with high sensitivity was constructed for the detection of Pb2+. Firstly, to obtain excellent electron transfer performance, sulfur defect-engineered Bi2S3-x/In2S3-y mediated signal enhancement formed by Bi2S3 and In2S3 with well-matched structure in terms of energy level as the substrate materials. In this case, the introduction of sulfur vacancies further affects the electronic structure of the material, which significantly improves the electrical conductivity and effectively increases the electron transfer rate. In addition, the as-synthesized Cu@Cu2O nanosphere is chosen as the marker to accelerate the electron transfer through the surface plasmon resonance effect of Cu. The constructed sensor was able to detect Pb2+ in the range of 1 ng mL-1-100 µg mL-1 with a limit of detection of 19.2 pg mL-1. The sensor exhibits good reproducibility, specificity, and stability, indicating such PEC sensor can achieve the sensitive detection of Pb2+ in the environment. This work paves a new way for the construction of PEC sensors and the specific PEC detection of Pb2+ in environmental waters.